Tajikistan acdc power module potting requirements(1)
The potting of the acdc power module is very important. This process not only involves the protection of the power module potting acdc power module (waterproof, moisture-proof, dust-proof, anti-corrosion, etc.), but also involves the protection of the power module. thermal design.
Commonly used power module potting materials are divided into three categories: epoxy resin, polyurethane and silicone rubber
The secondary power DC/DC converter of the communication power supply has been commercialized. The module adopts high-frequency PWM technology, the switching frequency is about 500kHz, and the power density is 5W~20W/in3. With the development of large-scale integrated circuits, the module power supply is required to be miniaturized, so it is necessary to continuously increase the switching frequency and adopt new circuit topologies. The power density of the module power supply has been greatly improved.
Epoxies cannot be used for stress-sensitive and module sealing due to their hardness and are basically eliminated by module power supplies. However, due to its low cost, this epoxy is still used in cost-sensitive micropower supplies. Some domestic bad 48V input power supply manufacturers also use this epoxy resin acdc 48V input power supply module. However, due to stress problems, the failure rate of this 48V input power supply is very high, and buyers are miserable.