Usually, surfactants are associated with other additives, such as dispersants, so why are they different? In fact, surfactants are a wide range of categories, including many auxiliary agents, and dispersants are also surfactants. However, it should be noted that inorganic dispersants are all surfact

Defoamers, also known as antifoams, will produce many harmful foam in the process of industrial production, so defoamers need to be added. But there are many types of defoamers, including organosiloxanes, polyethers, silicon and ether grafts, amines, imines, and amides, which have the characteristic

The main difference between dispersants and surfactants is that dispersants can improve particle separation in suspensions, while surfactants are substances that can reduce surface tension between two phases of a substance.Dispersant is a form of surfactant. But all surfactants are not dispersants.

The characteristics of defoamers for landfill leachate are as follows:1. The defoaming and defoaming effect of leachate treatment is significant, and the dosage is small, which will not affect the properties of the foaming system itself;2. It can remove various forms of foam, such as biological bact

Polyether defoamer1. Polyether type defoamers are formed by the polymerization of ethylene oxide (EO) and propylene oxide (PO) under certain conditions, using a substance containing active hydrogen as the starting agent. According to different application fields, there are specific requirements for

The application of alternative solvent based products in various fields. Waterborne polyurethane, as a representative, can be widely used in coatings, adhesives, fabric coatings and finishing agents, leather finishing agents, paper surface treatment agents, and fiber surface treatment agents.Waterbo

Compared with traditional solvent based coatings, water-based coatings have the advantages of low price, safe use, saving resources and energy, reducing environmental pollution and public hazards, and have become the main direction of the current development of the coating industry. Waterborne acryl

Waterborne acrylic resin includes acrylic resin lotion, acrylic resin aqueous dispersion (also called water dilutable acrylic acid) and acrylic resin aqueous solution.Compared with traditional solvent based coatings, water-based coatings have the advantages of low price, safe use, saving resources a

The characteristics of defoaming agents for landfill leachate are as follows:1. The defoaming and defoaming effect of leachate treatment is significant, and the dosage is small, which will not affect the properties of the foaming system itself;2. It can remove various forms of foam, such as biologic

1. Insoluble or insoluble in foam solutionIn order to destroy foam, defoamer should be concentrated on foam film. For the state of defoaming agent, it should be concentrated and aggregated in an instant, and for the state of foam suppression, it should always be maintained in this state. Therefore,

Accidents can also occur during the use of defoamers, and oil slicks are common. What is the reason for the oil slick of defoamer?This is due to its own materialDefoaming agents are mostly mixtures, mainly carriers or additives of defoaming agents. There are many types of defoamers, such as silicone

1. Active ingredient: The main ingredient of silicone defoamers is linear polysiloxanes (also known as silicone oil) that can maintain liquids at room temperature as active agents. The main types of polysiloxanes are: polydimethylsiloxane, fluorosiloxane, and ethylene glycol siloxane.Silicone oil is