Welcome to Dongguan Ruikun Material Technology Co.,Ltd.

Chile What are the Free of silicone defoamers for paints(1)

2023-03-30

The chemical methods to eliminate foam mainly include chemical reaction method and adding defoamer. The chemical reaction method refers to the chemical reaction between the foaming agent and the foaming agent by adding some reagents to generate water insoluble substances, thus reducing the concentration of surfactant in the liquid film and promoting the rupture of foam. However, this method has some shortcomings, such as the uncertainty of foaming agent composition and the harm of insoluble substances to system equipment. Nowadays, the most widely used defoaming method in various industries is the method of adding defoaming agents. The greatest advantages of this method are high foam breaking efficiency and convenient use, but finding suitable and efficient defoaming agents is the key.

Stability factors of foam
The direct cause of foam is the presence of surfactant, which reduces the surface tension of the solution. Under the combined effect of this reason and the attenuation mechanism of foam, different foam systems show different stability properties, which are mainly related to the following factors: the surface tension of foaming solution, the surface viscosity of foam, the viscosity of solution, the self-healing effect of surface tension (i.e. Gibbs surface elasticity and Marangoni effect) "The surface double layer repulsion and entropy repulsion forces of liquid membranes, the hydrophobic end structure of surfactants, and the steric hindrance effect are not independent factors, and changes in one factor can cause other factors to also change.". The most important factors affecting the stability of foam are the elasticity of the liquid film and the liquid discharge rate. From this perspective, it can be seen that the main factors affecting the stability of foam are different in different foam systems, and sometimes several factors exist at the same time and work together.
In addition to the above factors, some other factors will also affect the stability of foam, such as the size of foam, the coordination of solute and solvent, temperature, pH value, the evaporation rate of solvent, the impact degree of foam and the adsorption rate of surfactant

The study of foam can be traced back to Plato's time, but for hundreds of years, people have not formed a unified understanding of the definition of foam. American colloid chemist L · I · Osipow and Dow Corning's R · F · Smith defined foam from the density of foam; Japan's Koichi Ito defined foam from the perspective of foam structure, but ignored the correlation between bubbles; Professor Zhao Guoxi, a famous surface physicist in China, defined foam as: foam is a dispersion system in which gas is dispersed in liquid, gas is a dispersed phase (discontinuous phase), and liquid is a dispersion medium (continuous phase). Bubbles in liquid rise to the liquid surface, forming a bubble aggregate composed of a small amount of liquid that separates gas with liquid film. Scholars at home and abroad agree that foam itself is a thermodynamic unstable system. When the gas enters the solution containing surfactant, it will form a long-term stable foam system.

water-based

Chile Selection of antifoaming agents for different applications:

Flat coating

wear-resistant

powder

Features: Low viscosity, low defoaming pressure

dispersant

Recommendation: Mineral oils or mineral oil modified polyethers

Elastic coating

Features: High viscosity, high Free of silicone defoamers pressure

Recommendation: Polyether modified silicone

Surface coating and film covering adhesive

Recommendation: Polyethers, which can effectively prevent surface defects and have a small impact on gloss

agent

Water in Water Colorful

Features: More surfactants, stable foam

Chile Recommendation: Use polyethers or mineral oil to modify polyethers

Precautions for use of paint Free of silicone defoamers:

Before use, stir thoroughly and mix evenly; Adding the paint while stirring; Before use, it is generally not diluted with water; The dosage should be appropriate. Excessive dosage can cause shrinkage, edge shrinkage, poor brushing performance, and other problems; Too little dosage leads to poor defoaming effect; Add it in two stages, namely, add it in the grinding stage and the paint mixing stage, generally accounting for half of the total amount each time. Use defoaming agents with good foam suppression effect in the grinding stage, and use defoaming agents with good foam breaking effect in the paint mixing stage