Welcome to Dongguan Ruikun Material Technology Co.,Ltd.

Ukraine What are the ink defoamer for paints(1)

2023-04-28

Ukraine Selection of antifoaming agents for different applications:

Flat coating

Features: Low viscosity, low defoaming pressure

Recommendation: Mineral oils or mineral oil modified polyethers

There is no unified understanding of the mechanism of defoaming agents. According to the mechanism of defoaming agents proposed by predecessors, there are generally the following types: [4]
General defoaming mechanism
Typical defoaming mechanisms with a broad overview are the Robinson defoaming mechanism and the Ross hypothesis. Among them, Robinson mechanism is the basis of Ross hypothesis, which mainly emphasizes the liquid drainage of defoamer destroying foam and Marangoni effect to realize defoaming; The Ross hypothesis is based on the fact that the defoamer particles are insoluble droplets, while some defoamers actually produce defoaming effects in a dissolved state, so the defoaming mechanism of the Ross hypothesis is not comprehensive

hardening

Elastic coating

Features: High viscosity, high ink defoamer pressure

Recommendation: Polyether modified silicone

Surface coating and film covering adhesive

Recommendation: Polyethers, which can effectively prevent surface defects and have a small impact on gloss

Water in Water Colorful

Powder is defined as a substance that can reduce the aggregation of solid or liquid particles in a dispersion system. When adding dispersants and suspensions to the preparation of emulsifiable concentrates and wettable powders, it is easy to form dispersants and suspensions and maintain the relatively stable function of the dispersion system

Additives

defoamer

Features: More surfactants, stable foam

wetting

Ukraine Recommendation: Use polyethers or mineral oil to modify polyethers

agent

Organosilicon type
silicone oil
The commonly used silicone oils include polydimethylsiloxane and polymethylphenylsiloxane. Polydimethylsiloxane is used in paints and inks. Although polymethylphenylsiloxane has good compatibility, it does not have the ability to control surface state, so it is basically not used in leveling agents, and is mostly used for high-temperature resistance

Precautions for use of paint ink defoamer:

dispersant

Before use, stir thoroughly and mix evenly; Adding the paint while stirring; Before use, it is generally not diluted with water; The dosage should be appropriate. Excessive dosage can cause shrinkage, edge shrinkage, poor brushing performance, and other problems; Too little dosage leads to poor defoaming effect; Add it in two stages, namely, add it in the grinding stage and the paint mixing stage, generally accounting for half of the total amount each time. Use defoaming agents with good foam suppression effect in the grinding stage, and use defoaming agents with good foam breaking effect in the paint mixing stage